MBD-C9Z390-CG-O Supermicro LGA1151/ Intel Z390/ DDR4/ SATA3&USB3.1/ A&GbE/ ATX Motherboard

General Information

Technical Specs

Physical Stats
Form Factor: ATX
Dimension: 12" x 9.6" (30.48cm x 24.38cm)

Processor
CPU: 8th/9th Generation Intel® Core™ i9/Core™ i7/Core™ i5/Core™ i3/Pentium®/Celeron® Processor
Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 120W TDP

System Memory
Memory: 4 DIMM slots

Capacity: Up to 128GB UDIMM, DDR4-3866+MHz
Memory Type: 2666MHz /2400MHz 288-pin
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V

On-Board Devices
Chipset: Intel® Z390 Express
SATA: Intel® Z390 Express controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
Audio: 7.1 HD Audio
Graphics: Dual channel 48-bit LVDS(max. resolution up to 1920x1200@60Hz), HDMI(max. resolution up to 3840x2160@30Hz)
Network Controllers: Single LAN with Intel® single Ethernet PHY i219V

Input / Output
SATA: 6 SATA3 (6Gbps) port(s)
LAN: 1 RJ45 Gigabit Ethernet LAN ports
USB: 4 USB 3.1 Gen1 port(s) (2 via header; 2 rear type A)
5 USB 3.1 Gen2 port(s) (1 via header; 1 rear type C; 3 rear type A)
Video Output: 1 HDMI port(s), 2 DP (DisplayPort) port(s)
Serial Port: 1 COM Port(s) (1 header), RS232/422/485
TPM: 1 TPM Header
Expansion Slots
PCI-E: 2 PCI-E 3.0 x16 slots (16/NA or 8/8),
1 PCI-E 3.0 x4,
3 PCI-E 3.0 x1
CPU Slot3 PCI-E 3.0 x8 (IN x16) slot and CPU Slot1 PCI-E 3.0 x4 slot share the same PCI-Ex16 link with CPU Slot6 PCI-E 3.0 x16 slot. CPU Slot6 PCI-E 3.0 x16 slot and CPU Slot3 PCI-E 3.0 x8 (IN x16) slot will change to PCI-E 3.0 x8 link and PCI-E 3.0 x4 link respectively when an add-on card is installed in CPU Slot1 PCI-E 3.0 x4 slot
M.2
M.2 Interface: 2 PCI-E 3.0 x4, RAID 0 & 1
Form Factor: 2242/2260/2280/22110, 2242/2260/2280
Key: M-Key, M-Key
1 M.2 2242/3042 B-Key (USB2.0 x 1,PCI-E Gen2 x 1,SATA Gen3 x 1)

System BIOS
BIOS Type: 64MB AMI SPI Flash ROM
BIOS Features: ACPI 6.0
SMBIOS 3.0 or later
UEFI 2.4

Management
Software: SuperDoctor® 5, Watchdog
System Management Software: SuperDoctor 5
Power Configurations: Power-on mode for AC power recovery

PC Health Monitoring
Voltage: 5 -fan status, 1.2V (VDIMM), 1.05 (PCH), +5V standby, +5V, +3.3V, +12V
LED: +5V Standby alert LED
Temperature: PECI
FAN: 5 fans with tachometer status monitoring
Other Features
Chassis intrusion header